8" I-Beam Integrated Tongue & Frame The biggest differentiator from the DE is the move to an 8" I-beam.

The Benefit: Instead of 6" channel steel, the DX uses a continuous 8" I-beam that runs through the entire length of the trailer. This provides massive vertical rigidity, preventing the frame from flexing or "bowing" when you're loading a 12,000 lb machine or dumping 5 tons of wet material on uneven terrain.

7-Gauge (3/16") Super Duty Floor The DX upgrades the floor from the DE’s 10-gauge to a heavy-duty 7-gauge steel sheet.

The Benefit: 7-gauge is approximately 40% thicker than 10-gauge. It is specifically designed to handle the "point-loading" of steel-tracked machines and the impact of falling boulders or concrete demolition debris without denting or washboarding over time.

10,000 lb Heavy Duty Drop-Leg Jack The DX typically upgrades the standard 7k jack found on the DE to a 10k version.

The Benefit: When the trailer is fully loaded to its 14k capacity, a 7k jack can be difficult to operate. The 10k jack provides much smoother cranking and a higher weight rating, ensuring you can unhook a loaded trailer without straining the hardware.

Premium 516 Scissor Hoist Standard on the 2026 DX is the massive 5-inch by 16-inch scissor hoist system.

The Benefit: The scissor design provides a much wider base of support underneath the bed than a telescopic or single-ram lift. This stabilizes the bed during the dump cycle, making it safer to unload when the trailer isn't on perfectly level ground.

2-5/16” Demco EZ-Latch Forged Adjustable Coupler The DX uses a forged adjustable coupler mounted on a 5-position channel.

The Benefit: The "Forged" construction is stronger than the stamped steel versions found on lighter trailers. The EZ-Latch system automatically locks when dropped onto the ball, providing the most secure and user-friendly connection in the industry.

Slide-In 6' Channel Ramps with Rear Stabilizers The DX includes ramps, but it often pairs them with a beefier rear stabilizer system.

The Benefit: Because the DX is built to haul heavy equipment like the Bobcat T66 or Cat 259, the rear stabilizers are essential for preventing the truck's rear tires from being lifted off the ground during the loading process.

LOWER LOADING HEIGHT: The DX is a "Low Profile" design, sitting roughly 4" lower than Top Hat's DP models. This creates a shallower ramp angle, making it much safer to load equipment with low ground clearance.

POWERED FOR PERFORMANCE: Includes a 110V-5 Amp Charger and a deep-cycle marine battery. The Gravity Down function on the pump ensures you can get up to 20+ dump cycles a day without killing the battery.

FINISH QUALITY: Every 2026 DX features caulked seams and a primed and painted underside, protecting the trailer from the corrosive effects of hauling wet materials and winter road salt.

3-WAY REAR GATE: Includes the dual-action swing-out doors (barn doors) and a 1-piece spreader gate, allowing you to spread gravel as easily as you dump brush.