The Horizon EZ7 Series Low-Profile Dump Trailer is a commercial-grade, medium-to-heavy-duty dumping platform. Engineered for general contractors, landscapers, roofing crews, and dirt-moving operators, the EZ7 features Horizon's low-profile chassis design that drops the bed height for easy equipment loading and stable highway tracking.

The "EZ7" designation represents Horizon's low-profile dump line equipped with 7,000 lb. axles, available in standard 14,000 lb. GVWR or upgraded 15,200 lb. GVWR packages. Built with heavy-gauge steel and a commercial hydraulic hoist, this rig seamlessly transitions between bulk-material dumping and mini-excavator or skid steer transport.

Low-Profile I-Beam Main Frame & Integrated Tongue The main chassis is built around a continuous structural I-beam frame and wrap-around tongue, backed by 3-inch channel crossmembers spaced on tight 12-to-16-inch centers.

• The Benefit: Placing the dump bed lower inside the frame rails creates an ultra-low center of gravity for highway stability while keeping the loading deck height low. Tight crossmember spacing prevents floor "waffling" or warping under high-impact loads like dropped concrete or boulders.

Commercial Hydraulic Power Unit & Scissor Hoist (Telescopic Option) Dumping functions are driven by a heavy-duty hydraulic scissor hoist (or optional front-mount multi-stage telescopic cylinder) powered by an onboard KTI 12V hydraulic pump.

• The Benefit: Delivers extreme lifting leverage at the beginning of the dump cycle, pushing the bed up to a steep 45-to-50-degree dump angle. This breaks wet clay, packed dirt, asphalt, or roofing scrap loose instantly without requiring manual shoveling.

Heavy-Duty 10-Gauge Steel Floor & 24" Sidewalls The main box is fabricated using a continuous, solid 10-gauge steel floor plate paired with 24-inch (2-foot) 10-gauge structural steel sidewalls with integrated board brackets.

• The Benefit: Delivers high puncture and impact resistance against falling debris, skid steer buckets, and rock loads. The top rim is capped with a thick structural tube rail to prevent wall bowing, while built-in stake pockets let you add wood planks to extend wall height.

3-Way Combo Rear Spreader Gate & Slide-In Equipment Ramps The rear tail features a heavy-duty 3-way combination gate (dump doors, spreader gate, and pick-up tailgate) paired with under-bed slide-in steel ramps.

• The Benefit: Allows you to metered-spread gravel down a driveway, open full barn doors for bulk dumping, or pin the gate open and pull out the heavy-duty rear ramps to load skid steers, mini-excavators, or tractors directly into the bed.

Tandem 7,000 lb. Electric Brake Axles (14K to 15.2K Package) The running gear features tandem 7,000 lb. Dexter electric brake axles equipped with heavy slipper spring suspension.

• The Benefit: Rated at a standard 14,000 lb. GVWR (upgradable to 15,200 lb. GVWR), granting a true net legal payload capacity of up to ~9,200 to 10,500 lbs. (depending on bed length and options). Integrated EZ-Lube hubs make spindle bearing maintenance quick and simple.

Integrated Tarp Kit & Lockable Front Tongue Toolbox Comes factory-equipped with a heavy-duty mesh tarp assembly and a large steel tongue toolbox.

• The Benefit: The built-in roller tarp system allows you to cover loose gravel, sand, or debris in seconds to remain D.O.T. compliant on the highway. The front toolbox safely houses the hydraulic pump unit, deep-cycle marine battery, corded remote, and onboard trickle charger under lock and key.

6-Stage Baked Powder Coat Finish in Custom Colors The entire steel frame undergoes an aggressive steel grit blast prep before receiving a durable, heat-cured powder coat armor.

• The Benefit: Seals the steel chassis against stone impact, gravel abrasion, road salt, and rust in finishes like Midnight Black, Ash Grey, Military Green, Desert Tan, and True Red.

• Dual-Purpose Versatility: The combination of a low deck height, heavy-duty floor D-rings, and rear slide-in ramps allows the EZ7 to haul a 4-to-5-ton equipment rig in the morning, and transport/dump 5 tons of dirt or demolition debris in the afternoon.

• Effortless Push-Button Unloading: Eliminates hours of manual unloading work—the push-button hydraulic hoist clears full loads in under 30 seconds.

• Ultra-Low Loading Profile: The low-profile I-beam chassis keeps the rear loading approach angle shallow, making equipment drive-on safe and stable.

The Horizon EZ7 Dump Trailer is the premier choice for General Contractors, Landscapers, Roofing Crews, Excavation Subcontractors, and Property Managers. It is engineered strictly for operators who need a rugged low-profile dumper that seamlessly transitions between equipment transport and heavy bulk-material dumping.